3003 Aluminum Spacer Bar China

2021-09-23 15:05:31

The relative advantages of 3003 Aluminum Spacer Bar China bendable and non-bendable:

The common installation method of aluminum spacers is to use four connecting corners to make hollow glass. When the four corners of the hollow glass are made, if the operation is not good, the sealing effect will be poor. The first performance of the hollow glass is that the leakage points are increased. Air leakage and permeation will occur, which can easily cause the insulating glass to fail and shorten the service life of the insulating glass.

However, the folding and high welding hollow aluminum spacers are continuously folded during the installation and use process, which can easily eliminate the source of air leakage at the four corners. The aluminum frame molding standard is not deformed, the glass and the sheet are more convenient, and the hollow glass produced has high reliability. There will be no problems affecting the quality of insulating glass products due to air leakage at the four corners.

The high-frequency welding 3003 Aluminum Spacer Bar China on the market currently sells well. This shows that some high-end insulating glass customers are slowly inclined to high-frequency welding of aluminum spacers. The use of high-frequency welding aluminum spacers is slowly integrating into the larger market, and it is believed that it will soon replace ordinary hollow aluminum spacers.