1050 Aluminium Plate

2021-09-13 15:42:07

1050 Aluminium Plate China's process: aluminum ingot----flat-----cutting----punching, opening angle---rolling, roll shape---folding-seed nails---welding ---Reinforced assembly---Grinding---Pre-treatment for spraying---Spraying---High temperature baking---Packing finished product

The welding nails for 1050 Aluminium Plate China reinforcing ribs are generally aluminum welding nails, the specification is M6x15, and the spacing is 300mm;

Special attention should be paid to projects with MFT and ARUP as consultants. Check the technical description for the backplane to see whether reinforcement ribs are required;

When the board width is less than 700mm, the hemming height is adjusted between 15~20mm; when the board width is greater than 700mm, the hemming height is 20mm;

The layout position of the stiffeners is generally arranged perpendicular to the long side, and the spacing is determined by calculation. Generally, it is arranged every 600mm, and the stiffeners are not arranged when the board width is less than 600mm;

The total length of the sleeve core should not be less than 400mm, and the expansion joint should be at least 15mm;